Product ID:THERMOFIT S-1009 ADHESIVE, PART A
MSDS Date:05/01/1986
FSC:8040
NIIN:00N000658
MSDS Number: BCFYZ

RAYCHEM CORPORATION

300 CONSTITUTION DRIVE
MENLO DRIVE, CA 94025
US

Emergency Phone: (415) 361-3333

Preparer: GREGORY RAYMOND

Cage: 06099

RAYCHEM CORPORATION

MENLO PARK, CA 94025

Telephone: (415)361-3333

Cage: 06099

SILICA, AMORPHOUS, DUST

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: Fraction by Wt

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3; 8990

EPICHLOROHYDRIN/BISPHENOL A EPOXY RESIN (% OF

CAS: 25068-38-6

RTECS: KC2100000

Fraction By Weight: Fraction by Wt

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:ORAL LD50 (RAT):11.4 G/KG (EPOXY)
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:IRRITATING TO EYES, SKIN, NOSE &
THROAT. REPEATED/PROLONGED CONTACT MAY PRODUCE SKIN
SENSITIZATION/OR OTHER ALLERGIC RESPONSES IN SUSCEPTIBLE
INDIVIDUALS. MAY BE IRRITATING IF INGESTED, BUT IS NOT KNO WN TO
HAVE OTHER HARMFUL EFFECTS.
Explanation of Carcinogenicity:THE INGREDIENTS, PRESENT AT >/= 0.1% OF
THE PRODUCT, ARE NOT LISTED BY FEDERAL OSHA, NTP, OR IARC AS
SUSPECT CARC(MFR).
Effects of Overexposure:SEE HEALTH HAZARD DATA .
Medical Cond Aggravated by Exposure:N/K

First Aid:EYE:FLUSH IMME W/LGE AMT WTR FOR AT LEAST 15 MIN, HOLDING
EYELIDS OPEN. SEEK MEDICAL ATTN. SKIN:WASH IMME W/MILD SOAP &
WTR.CONSULT PHYSICIAN IF ALLERGIC SYMPTOMS DEVELOP. INGESTION:DO
NOT INDUCE VOMI TING.DILUTE W/WTR/MILK.SEEK MEDICAL ATTN.
INHALATION:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE
O*2/ARTIFICIAL RESPIRATION.

Flash Point:480F/248.9C
Lower Limits:N/K
Upper Limits:N/K
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, WATER.
Fire Fighting Procedures:TOXIC FUMES MAY BE INVOLVED IN A FIRE. FIREMAN
SHOULD WEAR NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:N/K

Spill Release Procedures:ISOLATE SPILL. REMOVE W/INERT ABSORBENT MATL,
USING APPROPRIATE PRECAUTIONS TO PREVENT CONTACT OR OTHER EXPOSURE.
CLEAN UP RESIDUE W/SOAP & WTR.
Neutralizing Agent:N/K

Handling and Storage Precautions:CURING OF ADHESIVE (PARTS A & B)
SHOULD BE DONE IN A WELL-VENTILATED AREA. THE CURING PROCESS IS
EXOTHERMIC.
Other Precautions:PREVENT CONTACT WITH SKIN & EYES. WASH HANDS
THOROUGHLY AFTER USE. USE ONLY W/ADEQUATE VENTILATION.

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:IN ACCORDANCE W/GOOD INDUSTRIAL HYGIENE PRACTICE, ENSURE
ADEQUATE VENTILATION DURING APPLICATION.
Protective Gloves:GLOVES.
Eye Protection:SAFETY GLASSES OR GOGGLES.
Other Protective Equipment:PROTECTIVE EQUIPMENT SHOULD BE BASED ON THE
OPERATION PERFORMED & PROVIDED AS NECESSARY TO PREVENT CONTACT.
Work Hygienic Practices:N/K
Supplemental Safety and Health
% VOLT:N/K .PH:N/K .FL PT MTD:N/K .RTE ENTRY:N/K .

HCC:N1
Boiling Pt:B.P. Text:N/K
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:N/K
Vapor Density:N/K
Spec Gravity:UNKNOWN (>1)
Evaporation Rate & Reference:N/K
Solubility in Water:NEGLIGIBLE
Appearance and Odor:VISCOUS, PURPLE LIQUID WITH SLIGHT ODOR.
Corrosion Rate:

Stability Indicator/Materials to Avoid:YES
SEE CONDITIONS TO AVOID (STABILITY) .
Stability Condition to Avoid:MAY REACT EXOTHERMICALLY (RELEASE HEAT)
WITH ACIDS, BASES, OR STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:NOT ESTABLISHED.MAY INCLUDE CO, CO*2,
ACIDS, ALDEHYDES.
Conditions to Avoid Polymerization:SEE CONDITIONS TO AVOID (STABILITY)
.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.